Cayenne S (9PA) V8-4.5L (2003)
3. Remove -lock on bolt of clutch power spring (arrow)-. If necessary, carefully drive the bolt out with a hammer and drift and take out the clutch
power spring. -Item 11-
4. Remove lock on pin (clutch pedal shaft)-arrow-. -Item 20-
5. The left lock remains on the pin (clutch pedal shaft). -arrow- Push the pin all the way to the left. If necessary, release and lay aside the wiring
harness. -Item 18, 19-
6. Detach pushrod of master cylinder from pedal. To do this, insert the pliers T10206 into cut-outs on clutch pedal. Remove clutch pedal. -Item 12-
Installing clutch pedal