Cayenne S (9PA) V8-4.5L (2003)
Installing rubber mounting on drive side
Note: Noises in drive line
^
Installation position of rubber mounting bulge is incorrect Rubber mounting bulge must be installed vertically into housing
^
Installation position of mount in housing is incorrect Pay attention to installation dimension of mount to housing
1. Position special tool assembly fixture 9716 a/b/c on rubber mounting ->Installing rubber mounting on drive side and align the markings.
Note: Noises in drive line
^
Installation position of rubber mounting bulge is incorrect Rubber mounting bulge must be installed vertically into housing
^
Installation position of mount in housing is incorrect Pay attention to installation dimension of mount to housing
2. Press rubber mounting flush -direction of arrow- into housing.
Subsequent work
Touching up, rubber mounting on rear final drive
1. Install rear final drive.