Cayenne S (9PA) V8-4.5L (2003)
Seals and Gaskets: Procedures
Removing and installing sealing ring for right-hand output flange
1. Remove all-wheel final drive.'
Removing sealing ring for right-hand output flange
1. Remove flange shaft with special tool striker VW 771/1 and shop-made tool.
2. Remove sealing ring with special tool striker VW 771/1 and top of extraction tool VW 771/37.
Installing sealing ring for right-hand output flange
1. Drive in sealing ring with special tool pressure piece T10032 until special tool touches transmission housing.