Cayenne S (9PA) V8-4.5L (2003)
-
To unscrew the cardan shaft bolts, a second fitter should sit in the vehicle and block the drive train by actuating the foot brake.
-
The color markings, match points -arrows- on the cardan shaft and on the all-wheel final drive flange must be aligned. This will neutralize the
residual imbalance of the components.
-
Apply another color marking if necessary.
Match points of front cardan shaft to front final drive
2. Remove cardan shaft from the transfer gear --> Front cardan shaft to transfer gear .
Front cardan shaft to transfer gear
3. Swivel the cardan shaft forwards over the suspension subframe and remove it.
Installing front cardan shaft
Information
-
To tighten the cardan shaft bolts, a second fitter should sit in the vehicle and block the drive train by actuating the brake.
-
Screws which are tightened with a torque angle must be replaced with new ones.
Information
-
The color markings, match points -arrows- on the cardan shaft and on the all-wheel final drive flange must be aligned. This will neutralize the
residual imbalance of the components.