Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1000006.png)
13. Remove the -wheel speed sensor-.
14. Remove the -snap ring-.
15. Remove the wheel bearing (tools).
16. Press out the wheel bearing. To do this, position the pipe and the mount T10205/5 and T10205/4 in the correct position on the wheel bearing
housing. Insert the tubular piston cylinder VAS 6178. Position the pressure piece T10205/6 and the nut for the threaded rod 8-2.
Installation
Note!
^
The wheel bearing must not come into contact with magnetic objects (e.g., magnetic screwdriver, magnet).
