Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1016003.png)
Note:
^
Transmission must be in neutral position!
1. Install top section of gearshift bracket. Insert shift and selector cable into fastening part -arrows-.
2. Screw in fastening screws -arrows- on top section of gearshift bracket. Tightening torque: 6.5 ftlb.
3. Lock shift and selector cable by pressing on the fastening parts -arrows-.
4. Function test for shift mechanism:
^
Position of gearshift lever?
^
Possible to shift through all gears, including reverse gear?
