porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Component Locations|Page 4871 > < Component Locations|Page 4869
Page 1
background image

Control Module: Service and Repair

373019 Removing and installing the Tiptronic control unit 

Preliminary work 

1. The ignition key must be removed before removing the connector from the control unit.
2. Move right front seat all the way back and up.
3. For vehicles with a telephone, remove the telephone control unit. 

Removing Tiptronic control unit 

Installation Position

Note:  
^

The control unit is located under the right front seat.

1. If the Tiptronic control unit is replaced, observe the points under coding the control unit. 
2. Unclip right front seat trim and remove drawer.

Component Locations|Page 4871 > < Component Locations|Page 4869