Cayenne S (9PA) V8-4.5L (2003)
Tightening torques -A- : 50 Nm (37 ft. lbs.) + 90° torque angle
15. Screw in four screws from the exhaust system on the cross member.
Tightening torque: 23 Nm (17 ft. lbs.)
Note:
^
To tighten the cardan shaft bolts, a second fitter should sit in the vehicle and block the drive harness by activating the brake.
^
Screws which are tightened with a torque angle must be replaced with new ones.
16. Screw in cardan shaft bolts to the front on the transfer box.
Tightening torques: 30 Nm (22 ft. lbs.) + 90° torque angle
17. Install engine guard.
18. Functional test of gear selecting system:
^
Will the vehicle start?
^
Do all the selector lever positions work?
Tightening torques
Note: Screws which are tightened with a torque angle must be replaced with new ones.