porsche Workshop Repair Guides

Porsche Cayenne S Workshop Service & Auto Repair Manuals

ABOUT US
Removing and Installing Transfer Box Control Module|Page 5086 > < Removing and Installing Transfer Box Control Module|Page 5084

Removing and Installing Transfer Box Control Module | Cayenne S (9PA) V8-45L (2003)

Page 3
background image

Removing control unit for rear-differential lock

Installing control unit for rear-differential lock

1. Slide control unit for rear-differential lock -2- fully into the holder -1- and press it in -arrow A- until the two clips -arrows B- engage securely.

Installing control unit for rear-differential lock

2. Plug in connector -2- (-arrow A-) and close the lock -1- (-arrow B-).

Plugging in connector

3. Fit control unit for rear-differential lock -2- into the body -arrow- and secure with the fastening screws -1-. - Tightening torque: 4.5 Nm (3.0 ftlb.) 

±1 Nm (±0.5 ftlb.)

Removing and Installing Transfer Box Control Module|Page 5086 > < Removing and Installing Transfer Box Control Module|Page 5084