porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Transfer Box Control Module|Page 5167 > < Removing and Installing Transfer Box Control Module|Page 5165
Page 5
background image

Installing package box

4. A charger with a current rating of at least 40 A must be connected to the vehicle battery.
5. PIWIS Tester 9718 must be connected to the vehicle. Start the PIWIS Tester. Switch on ignition using original key and press - to continue.
6. Select vehicle type and press -.
7. Select the rear-differential lock control unit and press -.
8. Read out fault memory. Erase the fault memory if necessary.
9. Carry out a test drive and read out the fault memory. If faults are present, proceed in accordance with the Guided Fault Finding instructions.

Subsequent work

Information:
Only for vehicles with additional air conditioning.

1. Secure additional air conditioning unit.
2. Install side trim panel for rear luggage compartment.

Removing and Installing Transfer Box Control Module|Page 5167 > < Removing and Installing Transfer Box Control Module|Page 5165