Cayenne S (9PA) V8-4.8L (2010)
1. Remove fuse box.
1.1. Undo fastening screws -2, 3-.
1.2. Pull out fuse box -1- on the driver's and front passenger's side -Arrow A- and tie to the side with connected leads.
2. Remove control unit for tyre pressure monitoring system.
2.1. Undo fastening screws -4-.
2.2. Remove control unit for tyre pressure monitoring system -5- ( -Arrow B- ) and tie to the side with connected leads.
3. Unclip wiring harness for parking brake contact switch and remove plug.
3.1. Unclip wire harness -6- on fastening clip -7- -arrow C-. Replace damaged fixing clips -7-.