Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-457002.png)
Removing exhaust valve
Information:
Secure the cylinder head on a level surface, which allows easy access to the valves from underneath.
No valves should be hidden by the surface under the cylinder head.
The cylinder head fastening must not tip over when tools are used.
Information:
The illustrations show part of the cylinder head installed.
1. The spark plugs must be removed and the valve lock screwed in before the valves are removed. The valve lock prevents the valves from being
opened while being pressed down. Alternatively, a rubber plate placed underneath helps if the cylinder head surface is smooth -2-.
Screwing in tool
Locking valves
2. Fit and adjust lever tool from the valve key assembly/disassembly tool for the Cayenne NR.54-1 set on the cylinder head. When doing so, ensure
that the middle pipe is positioned centrally over the sparkplug recesses. The operating lever can be secured centrally or eccentrically. The
fastening screws in the camshaft bearing caps in the front and rear bearing position are used to secure the tool brackets (figure shows fitted
cylinder head). Use the white plastic pressure piece with the magnetic insert to remove the valve keys. The assembly must be performed as shown.
