Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-1332006.png)
required for removing the front axle carrier. The other mounting points can be removed.
^
The mounting points 1/11 (designation on the guide pin) are fitted into -Position 1-. Double codes (e.g. 11, 22) are also used for mounting the rear
axle.
Mounting frame
^
A second worker is required in order to avoid damaging adjacent components when lowering the front axle carrier.
^
For installation, it is a good idea to mark the installation position of the front axle carrier diagonally at least two places on the body. To do this,
place the marks vertically with respect to the floor of the body using a felt-tip pen (e.g. mark along the front-axle carrier mount with the pen).
15. Position the -workshop trolley- with the correctly positioned mounting frame under the front axle carrier.
16. Mark the installation position of the front axle carrier diagonally at least two places on the body.
