Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-895004.png)
Position of upper part to lower part
3. Fasten shade on the one side with the retaining lugs -arrows-.
Inserting the shade
4. Push shade onto the upper part -> Fastening the shade, until it locks with an audible click.
Fastening the shade
Subsequent work
Subsequent work for cover of selector lever
1. Connect cable connection on underside of selector lever cover.
2. Install selector lever cover. Make sure that the wiring harness -arrows- is not pinched in the selector frame.
