Cayenne Titanium (9PA) V8-4.5L (2006)
/v8-4.5l/Page-966001.png)
Control Module: Service and Repair
Removing and installing the Tiptronic control unit
Preliminary work
1. The ignition key must be removed before removing the connector from the control unit.
2. Move right front seat all the way back and up.
3. For vehicles with a telephone, remove the telephone control unit.
Removing Tiptronic control unit
Installation position
Information:
^
The control unit is located under the right front seat.
1. If the Tiptronic control unit is replaced, observe the points under coding the control unit.
2. Unclip right front seat trim and remove drawer.
3. Unscrew the fastening screw for the support.
