porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Antenna Cable|Testing and Inspection|Page 5233 > < Antenna Cable|Testing and Inspection|Page 5231
Page 6
background image

19. Unscrew fastening nut -1- and remove ground strap together with torsion protection -a- from ground pin.
20. Release the support for the left rear spoiler wire harness socket -arrows A- and remove -arrow B-.

21. Release the right wire harness socket for the left rear spoiler -arrows A- and press out -arrow B-.
22. Release the support for the wire harness socket for the left rear spoiler -arrow C-, open it up -arrow D- and take out the lines -arrow E-.

INFORMATION:  The number of plugs can vary, depending on the vehicle equipment.

23. Release bracket -arrows A- and remove the plug connections -arrows B-.
24. Release the plug connections for the antenna lead -arrow C- and disconnect -arrows D-.

25. Unscrew both fastening screws -1- for the receiver for the auxiliary heater.
26. Release the antenna connector of the receiver for the auxiliary heater -arrow A- and pull off -arrow B-.
27. Release the connector of the receiver for the auxiliary heater -arrow C- and pull off -arrow D-.

Antenna Cable|Testing and Inspection|Page 5233 > < Antenna Cable|Testing and Inspection|Page 5231