Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Installing TPM transmitter (trigger) at front left
Installing transmitter (trigger) for Tire Pressure Monitoring (TPM) at front right
1. Install TPM transmitter (trigger) at front right.
1.1.
Position TPM transmitter (trigger) -3- on the washer-fluid reservoir -arrow A- and secure using the expanding clips -2-.
1.2.
Press in connector -1- (-arrow B-) until the connector -1- engages securely.
Installing TPM transmitter (trigger) at front right
Installing transmitter (trigger) for Tire Pressure Monitoring (TPM) at rear
1. Install support at rear.
1.1.
Push support -3- onto the pins on the body -arrow A- and screw down using the fastening nuts -2-. - Tightening torque: 2 Nm (1.5 ftlb.)
1.2.
Clip in line bracket -1- on the support -3- (-arrow B-).
Installing support at rear