Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Use the auxiliary line to route the wire harness (retrofit kit) --> Figure 11 -B- in direction of arrow through the center console.
Guide connector --> Figure 11 -A- through the bore hole.
Disconnect auxiliary line from wire harness (retrofit kit).
3.3 Connect connector for wire harness (retrofit kit) --> Figure 12 -A- to the console.
3.4 Remove tool for manual sunroof locking mechanism from the storage bin.
3.5 Fit console --> Figure 13 -A- and secure with three new screws (4.2 x 16) --> Figure 13 -B-.
3.6 Place tool for manual sunroof locking mechanism in the console.
3.7 Place rubber insert --> Figure 14 -A- in center console storage bin.
4
Connect electric wire harness (retrofit kit).
WARNING:
Working on the vehicle electrical system
-
Risk of short circuit and fire.
--> Disconnect and cover the battery.
--> Route electric wires without tension so that no chafing occurs.
--> Secure electric wires to existing wires/components using tie-wraps and/or wrapping tape.
4.1 Disconnect the battery. --> Workshop Manual '9000IN00 Work instructions after disconnecting the battery'