Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6.3 Stick loosened protective film on the control unit.
NOTE:
Do not confuse antenna connectors because if you do, there is no guarantee that the music player interface will function correctly.
6.4 Connect standard antenna connector from diversity control unit (angled) --> Figure 20 -D- and antenna connector (straight) from the antenna
line (retrofit kit) --> Figure 20 -C- to the control unit --> Figure 20 -A-.
Plug in wire harness connector --> Figure 20 -B- and tighten locking screws.
6.5 Pull protective film off the adhesive tape on the control unit --> Figure 21 -A-.
6.6 Stick control unit --> Figure 22 -A- to the dashboard trim panel at the middle right --> Figure 22 -arrow-.
6.7 Wind up the rest of the wire harness (retrofit kit) and use a tie-wrap --> Figure 23 -B- to secure it to the dashboard bracket --> Figure 23 -A-.
7
Concluding work