Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Amplifier: Service and Repair
Removing And Installing Loudspeaker Amplifier
Technical values
Preliminary work
Remove the side-panel lining at rear right.
Removing loudspeaker amplifier
WARNING:
Risk of damage to audio system components.
-
Remove ignition key and switch off the audio system.
-
Observe the requirements for working with optical waveguides.
INFORMATION: The loudspeaker amplifier is located behind the right rear side-panel lining.
1. Release -Arrow A- and remove -Arrow B- electrical connector from amplifier.
2. Release -Arrow C- and remove -Arrow D- electrical connector for optical waveguide.
3. Undo the four fastening nuts and remove.
4. Lift amplifier up and out.
Installing loudspeaker amplifier