Cayenne Turbo (9PA) V8-48L Turbo (2008): Rear Bumper Cover/Fascia Removal and Replacement
1.1. Undo fastening screws -1-.
1.2. Remove side guide rails -2-.
1.3. Check expander nuts -3- and unclip and replace them if necessary.
Installing rear apron
Installing side guide rail
1. Install side guide rails.
1.1. Clip in expander nuts -3-.
1.2. Position side guide rails -2- and attach with the top side flush with the side panel contour.
1.3. Screw in fastening screws -1-. Tightening torque: 1.5 Nm (1.0 ftlb.) ± 0.5 Nm (±0.5 ftlb.)
635719 Removing and Installing Rear Retaining Strip