Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Installing rear bumper
1. Fit rivet nuts
only when replacing the bumper on vehicles with external spare wheel
1.1. Insert rivet nuts in the bores and rivet with hand-held blind rivet nut device NR.125.
2. Installing rear bumper
2.1. Replace seal -3- (or -3- ).
2.2. Position rear bumper -1-.
2.3. Screw in fastening screws -2- (or -2- ). Tightening torque: 111 ftlb. + 22 ftlb..