Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Open doors.
2. Remove cover cap.
2.1. Carefully unclip lower cover -1- using a plastic wedge -arrow A- and remove downwards -arrow B-.
3. Removing housing with lock barrel.
3.1. Loosen fastening screw -3- -3- at the side and unscrew by approx. 3 mm (-arrow E-).
3.2. Pull door handle and hold in end position.
3.3. Loosen fastening screw -2- at the side and unscrew until the housing with lock barrel -4- can be pulled out.
3.4. Remove housing including the lock cylinder -4- (-arrow C-).