Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
7. Press out rubber sleeve -arrow A- and remove wire harness in a downward direction through pneumatic spring housing -arrow B-.
8. Release wiring duct -arrow A- and remove it from hinge -arrow B-.
9. Release cover -arrows C- , take it off the wiring duct -arrow D- and remove wiring duct from wire harness.
10. Undo fastening screws -arrows 3- and remove GPS sensor -arrow A-.
11. Release connector -arrow B- and disconnect it from the GPS sensor -arrow C-.
12. Pull off connector on right antenna amplifier -arrow A-.
13. Loosen the adhesive tape -arrows B- , then release both antenna plugs -arrows C- and pull them off.