Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Disconnect water line at plug connection -arrows C-.
7. Release bracket -arrows A- and remove both lines -arrows B-.
8. Release plug connections -arrow C- and disconnect -arrows D-.
9. Release wiring duct -arrow A- and remove it from hinge -arrow B-.
10. Release cover -arrows C- , take it off -arrow D- and remove wiring duct from wire harness.
11. Press out the rubber sleeve. -arrow A-
12. Pull out wire harness on hinge to the rear -arrows B-.
13. Pull off water line from spray nozzle -arrow A-.
14. Release connector on brake light -arrow B- and pull it off -arrow C-.