Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
INFORMATION: During removal, replace damaged clips with repair clips.
5. Clip wire harness to window frame -Arrows C-.
6. Press in wiring harness clips -Arrows A-.
INFORMATION: During removal, replace damaged clips with repair clips.
7. Press in wiring harness clips from the inside -Arrows B-.
8. Insert connector onto rear lid lock -Arrow A- until the locking tabs -Arrows B- are felt to engage.
9. Insert connector onto contact switch -Arrow C- until the locking tabs -Arrows D- are felt to engage.
Installing Wiring Harness For Rear Window, Left
1. Push wire harness through along hinge -arrow A-.
2. Pull wire harness through the opening -arrows B- until the rubber sleeve -arrow C- is felt to engage in the pneumatic spring housing.
3. Push pink socket into socket support -arrow A- until locking tabs -arrows B- are felt to engage.