Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-1008012.png)
15. Apply adhesive sealant to edges -arrows A- and press in Styrofoam element -arrow B- until it is felt to engage in the opening.
16. Press rubber sleeve into rear spoiler -arrow A-.
17. Position wire harness in rear spoiler and press onto Velcro strip segments -arrows B-.
18. Lay wire harness in wiring duct and push on cover -arrow A- until locking tabs -arrows B- are felt to engage.
19. Push wiring duct onto hinge -arrow C- until locking tabs are felt to engage.
20. Insert antenna plug -arrow A- until locking mechanism -arrow B- is felt to engage.
21. Connect red line to B+ connection of right antenna amplifier -arrow C-.
22. Tighten ground strap with fastening screw -arrow 2-.
