Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Rear Subframe: Service and Repair
WM 420519 Removing and installing rear axle housing
Preliminary work
1. For vehicles with level adjustment: Switch off level adjustment.
2. To bleed the level adjustment system (compressed air must be released from the system), use the Porsche System Tester. To do this, select the
Bleed level adjustment menu item in the Level adjustment system.
3. Raise the vehicle at the jacking points provided.
4. Remove the rear wheels.
5. Remove the tailpipe.
Tools and materials
Tools
-A- -Mounting frame
-11- -Take-up point for rear axle housing
-22- -Take-up point for rear axle housing
Removing rear axle carrier