Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4. Push top section of the steering column trim -4- down at the rear -arrow C- until the holding straps -3- engage audibly.
5. Adjust the steering column forward and upward.
6. Install ignition switch. To do this, push the ignition switch -2- from the rear through to the front -arrow D-.
7. Put on union nut -1- -arrow E- and screw it in using the appropriate special tool -arrow F-.
8. Install air vent for door window. Refer to Removing and installing air vent for door window.
9. Install trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard.
10. Install dashboard moulding on the driver's side.
Removing and Installing Dashboard Cover on the Passenger's Side
Removing And Installing Dashboard Cover On The Passenger's Side
Tools