Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Insert the trim panel under the dashboard on the driver's side.
1.1. Insert trim under the dashboard on the driver's side -4- into the guides -11- -arrow A-.
2. Clip in the bowden cable for the parking brake release.
2.1. Clip the ball joint -9- and sleeve -8- of the bowden cable into the release lever -10- until they engage audibly. Make sure that the fastening
clip -arrow- of the sleeve -8- is not damaged.
3. Push on the plug -6 and 7- until the locking tabs engage audibly -arrows B-.