Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Keyless Entry Transmitter: Service and Repair
Replacing Remote Control
Removing key bit
1. Release the key of the remote control and carefully jam a crosshead screwdriver -A- between remote control and key so that the key does not
engage in its end position.
2. Place a tool, e.g. a 10-mm open-ended/ring wrench -B- , between the key bit and the working surface.
3. Drive out the roll pin -C- - spring steel (max. diameter 1.5 mm) - with a tool such as a mandrel.
4. Fully pull out the roll pin with a pair of pliers.
5. Pull out key bit -arrow- from the remote control.
Installing key bit
1. Use a new remote control and insert the key bit -arrow- at the correct installation position (groove).