Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4. Perform a swap test with the Porsche System Tester. To do this, select menu ] PSM ] Function selection ] Drive links [.
Information
When replacing the hydraulic unit, the connected control mechanism must be coded with the Porsche System Tester (running gear and country
coding).
-
To do this, select menu ] PSM ] Function selection ] Coding [ and the relevant country. Observe the country coding!
5. Code hydraulic unit.
6. Perform a function test. During the test drive, perform at least one ABS control operation, taking the road conditions into consideration. Read out
fault memory. There must not be any stored faults.