Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-606002.png)
18-inch plus brake calliper connection
Installing front brake calliper
Information
Replace screws and lock nuts.
Never use an impact bolter to loosen and tighten the brake calliper on the wheel carrier.
Observe correct tightening torques.
The brake calliper is installed in reverse order.
1. Fit the brake calliper.
2. Fit the brake line to the brake calliper.
3. Clip in the wear indicator connector.
4. Position disc brake pads by operating the brake several times.
Subsequent work
1. Bleed the brake system.
2. Mount the wheel.
