Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Brake Caliper: Service and Repair
Front
Removing and installing front brake calliper
Preliminary work
1. Raise the vehicle.
2. Remove the wheel.
Removing front brake calliper
Removing 18-inch plus brake calliper (Turbo as of model year 2008)
18-inch plus brake calliper
Information
To gain better access for removal of the brake calliper, turn the steering fully either to the right or left.
1. Carefully press the brake pads back using water pump pliers.
2. Press the brake hose out of the fastening clamps on the wheel carrier and loosen it from the brake calliper. Collect the brake fluid in a suitable
container. Close off the line with suitable stoppers.
3. Unclip the brake pad wear indicator wire.
Information
Do not detach the brake calliper from the adapter.
Never use an impact bolter to loosen and tighten the brake calliper on the wheel carrier.
4. Remove brake calliper. -arrows-