Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Oiling the piston funnel
Alternatively, a commercially available piston ring restraining strap piston ring restraining strap for 944 - S2 and Boxster and 911 Carrera (996)
NR.57 can be used.
1
- Oil the inside of the funnel
2
- Piston and connecting rod ready for installation
4. Align piston-ring set (offset by 120 degrees) and compress piston rings using piston ring restraining strap for 944 - S2 and Boxster and 911
Carrera (996) NR.57. Ensure that all piston rings are correctly tensioned by the special tool -see Figure-. If you are using a funnel 9784/1, slide the
piston with connecting rod fitted into the funnel -2-. The collar of the funnel must be facing the crankcase -1-. Slide the piston into the funnel until
the piston shank protrudes approx. one centimeter down out of the funnel.
Inserting piston into piston funnel
Piston inserted in piston funnel