Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-251009.png)
Pressing in piston
7. Oil connecting-rod bearing shells and crank pins.
Information
The piston connecting rods are cracked and only fit in one position (in conjunction with the matching numbers).
Surface with cylinder number marking
Install con-rod code towards exhaust side -A-.
8. Then fit the connecting rod cap with bearing shell (twist lock together). The connecting rod numbers must be facing each other. Fit connecting rod
bolts by hand.
Retaining lugs for connecting rod bearings -B and C-
