Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Fit inner and outer seals in the valve cover -6 and 7-/-5 and 6- and apply a bead of Silikon 2210 Drei Bond sealant (000.043.204.58, status 02/06)
to the lining between the cylinder head and timing chain cover on both sides.
Valve cover seals, cylinders 1 to 4
1
- Valve cover for cylinders 1 to 4 (align over bar ignition modules)
2
- Oil cap
3
- Screw, M6 x 16 - Tightening torque: 10 Nm (7.5 ftlb.)
4
- Hall sender
5
- O-ring
6
- Valve cover seal
7
- Valve cover seal, inner
8
- Seal for hydraulic valve for camshaft adjustment
Valve cover seals, cylinders 5 to 8
1
- Valve cover for cylinders 5 to 8 (align over bar ignition modules)
2
- Hall sender
3
- Screw, M6 x 16 - Tightening torque: 10 Nm (7.5 ftlb.)
4
- O-ring
5
- Valve cover seal
6
- Valve cover seal, inner
7
- Seal for hydraulic valve for camshaft adjustment