Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2.1.
Screw -1- a holder with the appropriate thread into its matching thread on the cylinder head. The hooking piece -2- is pre-fitted in the holder.
Fit the hook
2.2.
Insert the appropriate plastic guide -1- in place of the tappet.
Insert plastic guide
2.3.
Insert assembly cartridge -1- for the valve keys into the plastic guide.
Insert assembly cartridge
2.4.
Hook the lever (assembly bar) -1- into the hook and place correctly onto the assembly cartridge. Make sure that the tool and equipment can be
effective directly.