Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Intake Manifold: Service and Repair
Removing and Installing Intake Manifold (Includes Eliminating Leaks Between Intake Manifold and
Turbocharger)
Removing And Installing Intake Manifold (includes Eliminating Leaks Between Intake Manifold And Turbocharger)
Tools
Technical Values
Preliminary work
1. Remove underbody panelling on the engine.
2. Remove the air-cleaner element.
3. Pull off the cable plug on the mass air flow sensor -1-.
4. Screw on a screw-type clamp between the mass air flow sensor (MAF sensor) and intake manifold. Remove MAF sensor.
Removing intake manifold
INFORMATION: If you find leaks at the connection point between the intake manifold and turbocharger (drops of engine oil), the intake manifold
and screw-type clamp must be replaced.