Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Oil Level Sensor: Service and Repair
Removing and installing oil level sensor on DFI engines
Preliminary work
Warning
Engine oil is toxic.
Danger of poisoning!
-
Do not consume food or drink while working (danger of mixing).
-
If swallowed, observe the warning information on the containers, contact a doctor if necessary and show the information on the
containers.
Warning
Danger of scalding with hot engine oil.
-
Allow engine and components to cool down.
-
Avoid contact with the skin and eyes.
-
Wear suitable protective clothing.
Warning
Oil is combustible!
Risk of fire due to oil and hot components (exhaust manifold, etc.)
-
Do not pour engine oil over very hot components (e.g. turbocharger).
-
Never place cloths soaked with oil on hot engine components.
-
In case of fire, use CO2 or dry powder fire extinguishers.
1. Remove engine guard.
2. Drain engine oil.
Removing oil level sensor
1. Disconnect the electric connector at the oil level sensor. Use the assembly tool T10118 if necessary. Confined work area under the engine carrier
and front axle.