Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Hexagon at camshaft
4. Remove chain tensioner.
5. Loosen timing chain.
6. Remove screw for the respective camshaft controller -1- and carefully take out camshaft controller -3- with both hands under the timing chain.
Carefully loosen the camshaft controller from behind using a rubber hammer if necessary. Replace the diamond friction washer when removing the
camshaft controller.
Camshaft control
1
- Screw, M12 Tighten completely after setting timing.
2
- Hexagon sleeve
3
- Camshaft controller
4
- Washer (reusable); replace if disassembled completely
5
- Camshaft control hydraulic valve
6
- Screw, M5 x 12
A - Direction of travel
Hexagon sleeve and camshaft controller screw