porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Servo Motors|Page 4791 > < Removing and Installing Servo Motors|Page 4789
Page 5
background image

16. Insert retainer plate with the two servo motors from below into the guides on the air conditioning unit as far as it will go.

17. Connect the electrical plug, pressing on until it audibly clicks into place -Arrows 2-.
18. Screw in both fastening screws -Arrows 1-. - Tightening torque: 1.0 ftlb.

Subsequent work

1. Install relay carrier. Install relay carrier holder.
2. Install vehicle electrical system control unit.
3. Install KESSY/immobiliser control unit.
4. Install trim under left dashboard.

Removing and Installing Servo Motors|Page 4791 > < Removing and Installing Servo Motors|Page 4789