Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
the connections -arrows B-.
9.2. Pull directional-control valve out of the moulded hoses -arrow C- and remove it.
Installing Directional-control Valve
1. Install directional-control valve.
INFORMATION: Before connecting the water hoses, apply suitable rubber lubricant to the flanges.
1.1. Push directional-control valve into the moulded hoses -arrow A-.
1.2. Slide spring band clamps onto the connections using the assembly pliers for spring band clamps, Cayenne hose connections NR.72-1 (
-arrows B- ) and align with the markings.
1.3. Slacken spring band clamps -arrows C- and secure the hoses.
2. Install directional-control valve holder.
2.1. Insert directional-control valve holder -4- ( -arrow- ).
2.2. Secure directional-control valve holder -4- using the two fastening nuts -3-. - Tightening torque: 6 Nm (4.5 ftlb.)
2.3. Screw down directional-control valve -2- using the two fastening screws -1-. - Tightening torque: 3.5 Nm (2.5 ftlb.)
3. Secure water tube on the directional-control valve at the top.
INFORMATION: Before connecting the water hoses, apply suitable rubber lubricant to the flanges.
3.1. Swivel water tube upwards and slide it onto the directional-control valve -arrow A-.
3.2. Slide spring band clamp onto the connection using the assembly pliers for spring band clamps, Cayenne hose connections NR.72-1 ( -arrow
B- ) and align with the markings.