porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4843 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4841

Cayenne Turbo (9PA) V8-4.8L Turbo (2008)

Page 2
background image

1. Release the plug -arrows A- and pull off -arrow B-.

2. Unscrew fastening screw -arrows 1-.
3. Unscrew the fastening nuts -arrows 2- and remove the cover.

4. Release the line holder -arrow A- , open it -arrow B- and unclip the fuel line -arrow C-.

INFORMATION:  Before disconnecting the fuel line, it is essential to observe the safety instructions.

5. Release the clamp lugs -arrow A- on the fuel pump and on the connection point in the wheel housing -arrow B-.
6. Pull out the line on both ends of the connections -arrows C-.

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4843 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4841