Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Remove trim panel.
3.1. Unscrew fastening screw -arrow 1-.
3.2. Unscrew fastening nuts -arrows 2- and remove trim panel.
4. Release line bracket -arrow A- , open it -arrow B- and unclip fuel line -arrow C-.
INFORMATION: Before disconnecting the fuel line, it is essential to observe the safety instructions.
5. Loosen and remove fuel line.
5.1. Release hose clamps -1- at the fuel pump and at the connecting point in the wheel housing.
5.2. Pull out fuel line at both ends of the connections -arrows-.
6. Remove fuel line.
6.1. Press out fuel line together with the rubber sleeve -arrow A- by pressing inwards -arrow B-.
6.2. Remove the fuel line first to the rear -arrow C- and then downward -arrows D-. Twist the fuel line slightly when removing it if necessary.
Installing Fuel Line - Fuel Pump To Wheel Housing Connection