Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4.2. Tighten fastening nuts -arrows 2-. - Tightening torque: 4.5 Nm (3.5 ftlb.)
5. Slide fuel pump together with the rubber sleeve onto the holder -arrow-.
6. Plug in connector on the fuel pump -arrow- until the connector engages securely.
7. Fill the fuel line.
Filling The Fuel Line
INFORMATION: The fuel line of the auxiliary heater can only be filled using the Porsche System Tester.
1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition. >> Continue.
2. Select vehicle type using the cursor keys.
3. Using the ?| key, move from the vehicle type to the control modules.
4. Select Auxiliary heater using the cursor keys and press the >> key.
5. Select Coding using the cursor keys and press the >> key.
6. Select Filling using the cursor keys and press the >> key. The fuel pump is activated for 50 seconds and fills the fuel line.
Subsequent Work
1. Install manual transmission.
2. Install automatic transmission.