Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Cabin Temperature Sensor / Switch: Service and Repair
Removing And Installing Temperature Sensors/Interior Temperature Sensors On Heater
Information
INFORMATION:
-
Vehicles with information air conditioner only have the evaporator temperature sensor -1- installed.
-
Before removing the temperature sensors/interior temperature sensors, switch off the ignition and remove the ignition key.
Preliminary work
Preliminary work - evaporator temperature sensor
Remove glove compartment.
Preliminary work - intake air temperature sensor
Remove the cover from under the right dashboard.
Preliminary work for centre temperature sensor/side vents right side
Remove glove compartment.
Preliminary work for centre temperature sensor/side vents left side
Removing servomotor for air conditioner.
Preliminary work for temperature sensor for footwell outlet vent, left side
Remove servomotor.
Preliminary work for temperature sensor for footwell outlet vent, right side
Remove glove compartment.
Removing temperature sensors/interior temperature sensors on heater
Removing the evaporator temperature sensor
1. Turn temperature sensor -1- 90° and remove from the heating/air-conditioning unit.