Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
4.4. Lift charge air hose -4- up and remove it -arrow E-.
5. Seal lines -1 and 2- on the PDCC reservoir with hose clamps -3- to prevent them from leaking.
6. Unscrew fastening screws -1- and unclip lines -2 to 5- at the line bracket -arrows-.
7. Unscrew fastening nuts -1- and push line bracket -2- with PDCC lines downwards -arrow-.
INFORMATION:
-
Coolant hoses that come into contact with Pentosin must be cleaned thoroughly with water immediately.
-
Replace visibly swollen coolant hoses.
8. Disconnect lines at the tandem pump.
8.1. Unscrew banjo bolt -1- and remove the two sealing rings -2-.
8.2. Carefully press line -3- to one side -arrow A-.
INFORMATION: The line can only be removed fully together with the air-conditioning compressor.