Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-857006.png)
11.3. Remove line bracket -1- ( -arrow- ).
11.4. Unscrew fastening screw -4- and support the air-conditioning compressor with your hand.
12. Remove air-conditioning compressor.
12.1. Carefully press lines -1 and 2- outwards -arrows A-.
12.2. Turn the air-conditioning compressor -3- ( -arrow B- ) and remove it between the two lines -1 and 2- ( -arrow C- ).
Installing air conditioning compressor
CAUTION:
Risk of damaging the air-conditioning compressor.
-
The engine must not be started until the air-conditioning system has been filled.
INFORMATION:
-
If the air conditioning compressor is blocked/seized up, then additional steps must be carried out to ensure the operation of the air conditioning.
-
New compressors are pressurised and are filled with the required amount of oil for the refrigerant circuit.
-
The remaining oil quantity in the individual components must therefore be taken into account.
-
Refrigerant oil from the compressor or refrigerant oil removed by suction from a previously run air-conditioning system may no longer be used
(special-category waste).
1. Open the cap on the high-pressure side and relieve the pressure from the air conditioning compressor -A-.
