Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
5. Lever down retaining clips with a screwdriver -L-.
6. Take out the seal -N- from the housing halves.
7. Unscrew the four fastening screws -3- in the area of the holding tray for the heat exchanger.
INFORMATION:
-
There is a retaining pin on the left side underneath the heat exchanger which joins the lower holding tray (where the heat exchanger is located) to
the air conditioner.
-
As soon as the retaining pin has been pulled out, the heat exchanger with the holding tray can be folded down.